Ahaha!
Good to see the old lady looking like new again!
Danke! We are crazy about it, really.
Es gibt 69 Antworten in diesem Thema, welches 17.250 mal aufgerufen wurde. Der letzte Beitrag () ist von gtcranky.
Ahaha!
Good to see the old lady looking like new again!
Danke! We are crazy about it, really.
nice rebuild
the x trail brake disc is 28mm so the brake pad holder also have 28mm or more when you build in a 24mm disc you have to much space i don t know if this can be a Problem
when the disc and pads are new ist ok bud when they are in use the pads and the disc lose material so they going smaller
I think, I understand. I have stock front calipers, brackets and pads from Maxima [lexicon]A32[/lexicon] — 280x26 (unlike X-Trail with 28 mm), and discs from Sonata are also 26 mm.
oh ok These are maxima and not x-trail ok sorry ok than they are for 26mm cool i never think on maxima calipers i looked all the time for the x-trail
nice rebuild
Danke!
I think, I understand. I have stock front calipers, brackets and pads from Maxima [lexicon]A32[/lexicon] — 280x26 (unlike X-Trail with 28 mm), and discs from Sonata are also 26 mm.
oh ok These are maxima and not x-trail ok sorry ok than they are for 26mm cool i never think on maxima calipers i looked all the time for the x-trail
But why? Do X-Trail front brakes fit without modification?
nice rebuild
Danke!
oh ok These are maxima and not x-trail ok sorry ok than they are for 26mm cool i never think on maxima calipers i looked all the time for the x-trailBut why? Do X-Trail front brakes fit without modification?
i don t know they lock very similar to the maxima
i don t know they lock very similar to the maxima
But Maxima's calipers fit well without any modification
I've receive a question about side markers/repeaters. Here is an answer:
Bonnet, trunk, amber corners, tail lights, fenders, exhaust manifold and engine radiator are genuine JDM parts. Those parts brought from Far East of Russia, they still have P10 in junk yards. Approximately 9000 km from us Side repeaters are genuine for JDM fenders. You can compare condition. Old were 1995, JDM are 1994
My rusty stock fenders:
JDM fenders:
Photos from the seller from Vladivostok (Russian city, near Japan)
Photo, after receiving:
Did you use the [lexicon]P10[/lexicon] brake caliper carrier(?) or are these of the Maxima?
Sorry, I used your pic
Did you use the [lexicon]P10[/lexicon] brake caliper carrier(?) or are these of the Maxima?
Sorry, I used your pic
It's from Maxima, of course. I use a whole set of Maxima calipers in front. Only brake discs are from Hyundai, because Maxima [lexicon]A32[/lexicon] has 5 lug hubs.
I want do this swap on a [lexicon]S13[/lexicon], the [lexicon]P10[/lexicon] has the small 257mm OEM. But the [lexicon]S13[/lexicon] facelift has 280mm and the caliper also fits on [lexicon]A32[/lexicon] 88-91.
Could you measure the space between the bolts? I could only do some math with pictures of the calipers but its looks promising (about 16cm)
I want do this swap on a [lexicon]S13[/lexicon], the [lexicon]P10[/lexicon] has the small 257mm OEM. But the [lexicon]S13[/lexicon] facelift has 280mm and the caliper also fits on [lexicon]A32[/lexicon] 88-91.
Could you measure the space between the bolts? I could only do some math with pictures of the calipers but its looks promising (about 16cm)
Halt uns hier mal auf dem Laufenden obs am [lexicon]S13[/lexicon] passt.
very nice project man
I´m too sad I sold my eGT in the past.
love your brake. looks awesome and I kinda like your headlights
the later [lexicon]P11[/lexicon] and of course the GT and [lexicon]TS[/lexicon] had 280mm brake rotors too. maybe they could fit too.
really need to get a [lexicon]P10[/lexicon] again
Alles anzeigenvery nice project man
I´m too sad I sold my eGT in the past.
love your brake. looks awesome and I kinda like your headlights
the later [lexicon]P11[/lexicon] and of course the GT and [lexicon]TS[/lexicon] had 280mm brake rotors too. maybe they could fit too.
really need to get a [lexicon]P10[/lexicon] again
Thanks you, mate! [lexicon]P10[/lexicon] rocks
[lexicon]P11[/lexicon] 280 mm rotors are 22 mm of thickness, also as stock [lexicon]P10[/lexicon]. Maxima's calipers need 26 mm rotors.
Hello!
I've just ordered APEXi Super Megaphone to replace my old rusty stock exhaust.
It should fit well, I think.
Nice progress! Five Stars
A few days ago we finally got the floor mats. Everyone knows here, how it's difficult to find a suitable new mats, because OEM for the [lexicon]P10[/lexicon] is no longer produced. We took a chance and ordered Nismo floor mats for Sentra SE-R [lexicon]B15[/lexicon]. They are still available for purchase — 74902-RNB50 (2002-2004) or 74902-RNB51 (2005-2006). You can see, how they fit.
What do you think about it?
They fit almost perfectly.
Like it.
Really beautiful work
Wow...nice [lexicon]P10[/lexicon] mate.
I'd love to see you slam the shit out of it and give it some nice big wide wheels.
Buy anyways...this [lexicon]P10[/lexicon] is a thing of beauty for sure!