up... some photo of the wheels after import from USA
Beiträge von almeragt
-
-
last price: 500 EUR for the wheels delivered to Germany!
-
up... can deliver to DE for 50 EUR = 600 EUR/set delivered within the Germany
-
Here is some video from the dyno run - poor quality, but better than nothing:
http://youtu.be/VJBAzvaEInQ -
We have been on the same dyno with my tuner Raddy yesterday. After several changes in the map and dyno runs We came to decision, that best performed the initial map I Had /which made Raddy on the road/. Raddy tuned a little bit AFR between 5500-6100 RPM, what doesn´t affect the maximum power at all... It was confirmed, that good tune on the road = perfect overall performance.
Against that only change comparing to the last dyno run was the different oil /Millers Oil Nano 10W50 now, in previous dyno run it was 5W40/ , coolant fluid /Evans power cool 180/ and temperature of 16°C against 21°C before, I have got the best numbers as high as: 239,4 [lexicon]HP[/lexicon] and 216 NM. All other changes in the maps made less power - but still around 2-3 PS less only.
don´t know, how it is possible that now We achieved that power... but anyway car runs perfects and has a plenty of power...
Only thing I need is oil cooler - as far as the oil when I´m driving on the track is too hot... On the road I didn´t have any problem /even if I´m driving the car really hard/, but car is running different conditions on the track...
And graph at max = 176 KW / cca 239 PS
-
550 EUR incl. 3 tires /older semislick Falken RT615 - 3 tires are OK, one tire not/ - tires are not perfect, but good for this season for sure... Can send more pictures by email, if will be someone seriously interested
-
NEU PREIS: 550 EUR/set!
another picture
up!
-
wow very nice powerband .. max power @ 8400 and rev limiter @ 8500 .. very nice
thats how a engine should work, max power near rev limiterwhats your actual curb weight ?
many thanks! don´t know exactly as far as I was not on the weight, but suppose the weight around 1100 kgs... We will tune on the dyno next week and will try to squeeze another few ponnies...
-
Nice power and max. power @ over 8000 rpm, sweet
Great interior as well. What kind of Recaros are that?
many thanks! yes, holds the power up to the rev limiter / 8500 RPM...They are EVO 8 Recaros, custom re-trimmed in black/red with black dots Alcantara, custom super low rails...
-
NEU PREIS: 550 EUR/set!
another picture
-
some updates - new pictures on "old" O.Z. wheels, but now in white colour
Car was dynoed last week - I was even on 2 dynometers, because first time the RPMs were loaded not correctly and It has measured much lower torque...
Anyway - max power output was more less the same on both dyno´s /the only one change comparing to previous dyno run were my tires - now I had 215-40-17 and previous run was made on 205-40-17/, but thanks to good aligment of RPMS with dynometer, I have made 218 NM comparing to 21 NM before
So car has made around 229 PS and 218 NM... We will go again on dynometer soon and will try to make some changes in timing - will try to squeeze some more power
-
Ich verkaufe meine JDM felgen, aus den USA im Winter importiert. Ultra light!
7x17
4x100 - PCD
ET42
Gewicht: cca 7 kg/wheels
Weiss
Preis: 650 EUR/set
Wheels has no scratches or so - like new. They were powder coated in white /because I didn´t like their black color/. They are on my car 3 weeks only and covered around 250 km. They cost new around 1.100-1.200 EUR/set
Price is NOT including tires and red screws!
Contact: private message, email
email: matej.samko@blueexpeditors.com
Pictures:
-
and some pictures of interior... Will try to make some better pictures and video in coming weeks...
-
So the car is finally on the road! Many THANKS to my friends Raddy, Roman and Jagy. Without you guys it would be impossible to make this project real! Thanks!
Car has complete new map for modified Xcessive plenum with velocity stacks, 4 inch intake pipe with integrated MAF and Q45 TB... The car is now a real beast! Pulling like a train... Will be on dyno this week...
Have made some photos - quality is poor /didn´t have much time, so I took some pictures by phone only/, but anyway I will hope you will like it...
-
Many thanks for the comments! Now We are trying to install modified Xcessive intake... Next week will try to re-map and then I can make some onboard video...
-
some photos from my Friday´s visit of garage... Dual Gauge of oil pressure/temperature is in /We have little bit changed the display and covered by carbon/, dash board has been flocked and together with new steering wheel is in and working on modified Xcessive intake... and little change - GTiR rear wing for [lexicon]N15[/lexicon] from Japan
-
Many thanks Gentlemen
-
little update... my car looks currently like this:
-
and one photo of the rear side of my car + one from the Nissan ownerscubl in Czech Republic last August. Hope you will enjoy it :
-
Very nice [lexicon]N15[/lexicon] !
215HP out of a SR20 is very nice. Over 100hp per liter
Do you have some videos of driving the car? Want to her it scream
Many thanks! unfortunately not, I have no quality videos... But I will make a few in the spring and post them...
